Dual Fuel Range Cooker With 13amp Plug
Are you a cook at home who loves the responsive heat control of gas cooktops but wants an electric oven to bake? Find a dual fuel cooker that offers the best of both worlds.
Many home chefs with experience prefer gas cooktops due to their superior temperature control and the ability to utilize sophisticated cooking techniques, such as grilling. These powerful stoves can be costly particularly if they require an extra gas connection and an electrician to install them.
What is a 13amp outlet?
If you have dual fuel range cooker (also called an electric and gas oven), then you'll need a suitably rated 13 amp plug. The plug will also have to be hard-wired into the cooker circuit ring by a qualified electrician.
This ensures that the current flowing through the plug does not exceed the limit of safety that could result in an electrical fire. The current is controlled by a fuse inside the plug. The fuse goes out whenever the current passes through it beyond its capacity, which protects the appliance from overcharge of electricity.
The fuse is rated 13 amps, which is shown on top of the plug. This is the maximum amount of current the plug could carry without damaging the appliance or heating the socket. It is crucial that when replacing fuses you always use the same amperage as the original. If you replace the fuse with one that has the different ratings, you risk overheating the socket and possibly putting you and others at serious risk.
Ceramic 13 amp fuse are extremely robust and can withstand high temperatures from an oven. Ceramic elements are also fire-resistant and thus a better choice over other types.
There are several ways in which a 13 amp plug can be connected. It can be connected to an existing live socket, and the flex is connected to it using a screw or plastic jaw-type cord clamp. The clamp on the cord should be tightened after the plug has been tightly pushed into place.
Some plugs will have a cardboard wiring diagram over the pins, and these should be removed before connecting the wires. It is crucial that the wires be cut to the proper length since leaving them too long can cause them to be crushed when the plug cover is replaced. The earth wire must be the longest one to ensure that it is connected before the neutral and line pins.
How do I install an outlet with 13amps?
The vast majority of dual fuel range cookers in UK are wired with an amp rating of 13 amps. This is important since ovens draw large amounts of current, while normal plug sockets have a 10-amp rating.
Generally speaking, new appliances must be equipped with plugs at the time of purchase and it is all in keeping with the Plugs and Sockets etc (Safety) Regulations 1994. However, older appliances may not be connected to an outlet and that is where the problem arises.
When connecting the cooker to an existing plug socket the first thing to do is to check that the rating of the fuse in the fuse box is in line with the plug's rating. This is vital because a faulty fuse could be dangerous.
It is also recommended to check that the fuse is completely seated into the cartridge, and that there isn't any movement. Next up is to prepare the flex that is to be used. First remove the sheathing from the flex to expose the three conductors that are insulated within. Use commercial dual fuel range cookers to nick the sheathing just beyond the grip on the cord at the point of entry into the plug. The blade will not be able to penetrate the insulated conductors. This nick must be large enough to allow for the cable and sheathing to separate as the sheathing is pulled back. Cut off the excess sheathing leaving a little more than 40mm over the flex.
The flex is placed over the plug, with the earth terminal on top and the live and neutral terminals at the bottom. Utilizing the colored conductors to guide you and the sheathing is removed from each pin and the internal cable is fixed to the appropriate terminal by using the cord grip. If the plug is equipped with a cord clamp that is screw-type, unwind it and then pull the insulation back to reveal the copper wires. Connect each wire insulated to the correct terminal by using the channel in the plug. Start with the earth conductor, then the neutral, and finally the live.
What is the maximum current draw of a plug with 13amps?
The maximum power draw of a 13amp plug is 3kw at 230 volts. This is a lot of power, but the standard fuse fitted in a UK plugtop will not fail until the cable is heated to a risky temperature. It is essential to be aware of the amount of power you are using in your kitchen as a defective plug or socket can cause an accident.
The ceramic fuses that are used in plugtops weigh around 25mm in diameter and are designed for mains voltages of 240V. They'll feature an BS kitemark or similar mark on the side and contain sand. There are glass or plastic alternatives, however they should never be used with a live plug, or else you could blow the fuse and potentially be electrocuted!
The majority of dual fuel range cookers in the UK require hard-wired and will not plug directly into an outlet on the wall. They are usually connected to a separate cooker ring circuit that is suitable for appliances that consume up to 20 amps.
Examine the ring circuit in your home using the fuse box, or contact a local electrician. They should be able to tell you if the sockets within your home are connected to the same ring, or if they are separate and whether there is a separate circuit for your oven.
The size of your kitchen will be a major factor when you decide to purchase a dual fuel range cooker. We have a wide choice of cookers to fit any space, from compact 50 - 60cm dual fuel models as well as huge 90cm + double oven options from leading brands like Rangemaster and StovesAreUs.
We also have a broad range of multifunction gas and electric cookers. These multi-functional appliances let you cook a variety of dishes, including pasta, casseroles and curries!
Currys offers a wide range of Cookers. Explore our online collection or stop by our store to see them. We offer free home installation and delivery on certain range cookers and flexible payment options. Our staff is ready to answer any questions you may have. Contact us via email or phone. Credit is subject to status and terms and conditions apply.
What is the most draw for a switch for a cooker?
There is a lot of confusion regarding the maximum current draw of a cooker switch. Most cookers are hard-wired, and connected to a dedicated oven-ring circuit not an ordinary socket. This is due to the fact that they usually consume more than 20 amps when the electric hob and gas oven are being used.
You will not find dual fuel range cookers that can be installed in a standard socket since this could pose an extremely high risk of fire and would violate electrical regulations. A professional electrician should always install new electrical wiring in the kitchen to an oven. They will also make sure that the load of the oven and hob do not exceed the circuit's supply capacity.
Dual fuel range cookers combine the ability to cook with the sensitivity of a gas stove with the precision and precision of an electric oven. This is why they are popular among cooks and chefs alike. Dual cookers that use fuel are great to experiment with different cooking techniques, such as searing or grilling.
When you are looking to purchase a new range cooker you'll have to consider various aspects like size, performance and cost. Additionally, you'll also need to make sure that your home has the right gas hook-up for the appliance. If you're unsure you're not sure, it's recommended to have an Gas Safe engineer inspect your home prior to installing.
The Currys range of dual fuel range cookers includes options to suit a variety of budgets, ranging from low-cost models from Indesit and Zanussi to our own exclusive Essentials collection. If you're looking for something little more advanced, we also stock an extensive selection of premium JennAir ranges, featuring several innovative features.
It is crucial to read the user's manual before purchasing a dual-fuel range cooker. It will provide you with specific information regarding the electrical and gas requirements. It is essential to ensure that your house has a gas hook-up suitable, and you may need to hire a plumber to install this for you if necessary. Depending on your home you'll also have to ensure that you have a dedicated cooker ring circuit installed and approved by a licensed electrician.